Computers cool themselves by using a liquid-like substance called copper. A better way to keep the machine cooler is by using an external device that has been designed specifically for this purpose, such as a water cooling system or an air conditioning unit.
The “how to install liquid cooling on cpu” is a tutorial that will teach you how to use a liquid cooler on your PC. It includes step by step instructions and pictures of the process.
If the desktop computer becomes too hot during the summer months, or if we notice a drop in performance due to excessive heat (a phenomenon known as Throttling), the air cooling system is likely insufficient to cool it, and a liquid cooling system, obtainable through a liquid heat sink connected to a pump and a radiator, is required (to be mounted on the computer case, where there are outlets for the fans).
In the following tutorial, we’ll show you the benefits and drawbacks of utilizing a liquid cooler, as well as the finest models available on Amazon and how to install them on our computer, always paying special attention to the details (since we will have to deal with liquids in close contact with electrical circuits).
ALSO READ: How to Keep Your Laptop Cool
Liquid cooler benefits and drawbacks
The benefits of installing a liquid cooler on our desktop computer are many, as shown in the table below:
- Better cooling: the liquid in contact with the heatsink takes heat from the CPU more effectively, decreasing operating temperatures substantially even in the summer (CPU always with temperature under control).
- Longer CPU life: When a processor is properly cooled, it is less susceptible to the damage produced by excessive heat, and hence lasts longer on average than similar air-cooled CPUs.
- Secure overclocking: With liquid cooling, the margins for overclocking are considerably bigger than with air cooling, therefore we may boost the frequency of our CPU in perfect safety.
- Maximum gaming power: if the game you choose needs a lot of CPU (for example, to manage NPCs), having a well-cooled processor will enable you to push the game settings to the limit without having to compromise due to the temperature attained during the game.
Unfortunately, there are certain drawbacks to using a liquid cooler on a PC, which you should be aware of before continue with this step. The following are some of the drawbacks of liquid dissipation:
- Liquid dissipation is louder than air-cooled systems since there is always an active pump running the coolant and two or more fans on the radiator. Only a few inexpensive versions are capable of performing adequately without a specialized pump, resulting in little noise.
- Water leakage risk: liquid heatsinks include water, which may easily escape from pipe connections, radiators, and the heatsink itself, causing irreparable damage to the PC components where it drops (as well as increasing the risk of fire and electrocution).
- A liquid cooling system for PC gaming is more expensive. Fortunately, there are also low-cost, easy-to-assemble variants available for home PCs designed for gaming or very high CPU loads.
Only after carefully weighing the benefits and drawbacks of this technology can we go to the next section of the book, in which we will show you which are the finest models available on Amazon, the top shop for PC components, with a 2-year dependable warranty.
Install a liquid sink.
A liquid cooler is made up of a number of extremely particular components that should be understood before purchasing a certain model. The following are the components of a liquid cooler:
- Heatsink
- Pump for liquids
- Radiator for cooling
- Fans for radiators
We choose a liquid cooler with a single fan, two fans, or three fans based on our cooling requirements, as well as the sort of home we have. After deciding which heatsink to use, we remove the socket, the case’s side panel, and the old air cooler (a fan with metal fins beneath), taking special care to the fan wire (FAN CPU, which is attached to the motherboard).
We wipe the surface of the processor with Isopropyl Alcohol to remove the old thermal paste, then apply the fresh thermal paste, buying a new tube such as the ARCTIC MX-5.
We attach the new heatsink to the surface of the CPU using permic paste, then locate a position for the radiator and any pump using the screws included in the heatsink’s package.
The next step is to reconnect the CPU fan cable (CPU-FAN) to the motherboard’s dedicated socket and verify whether everything works. It’s best to run this test with the case open so you can react if anything goes wrong. To power the pump or any LED lights, you may require numerous connections on the motherboard or a separate connection from the power supply for bigger heatsinks.
You may also read our tutorial on how to replace the fans on your computer for additional information.
Models that are the easiest to construct
After carefully considering whether or not to install a liquid cooler, let’s look at the finest models available for contemporary PCs, so that any modern CPU may be better cooled, particularly on PCs designed for gaming or powerful graphics processing.
The ARCTIC Liquid Freezer II 120, which costs just 70 €, is the first liquid cooler to consider.
This heatsink is compatible with the newest Intel and AMD CPUs, and it has an integrated PWM controlled pump, a variable speed fan (200-1800 RPM), and a hermetic system to prevent liquid leakage.
If we want a heatsink with two fans, we may look at the Corsair iCUE H100i ELITE CAPELLIX, which starts at 140 Euro.
33 Bright (software-controlled) CAPELLIX RGB LEDs, two PWM-controlled 120 mm RGB fans, fan speeds from 400 to 2,400 RPM, Zero RPM Mode, and a specialized iCUE Commander CORE system are all included on this heatsink.
If you have enough room in your case, a three-fan heatsink like the Cooler Master MasterLiquid ML360 from 120 Euro is a good choice.
This heatsink comes with a 360mm LED-illuminated radiator, dual dissipation, low-profile dual chamber pump, Cooler Master MasterPlus + software (for LED control), and a PWM fan control system.
Conclusions
Assembling a liquid cooler is a crucial step in improving your gaming PC or a computer devoted to heavy activities, but it takes a basic understanding of how to disassemble the computer’s internal components. If we are not handy, we should seek assistance from a technical buddy or hire an experienced specialist so that we can swiftly construct the heatsink of our choice.
We may also read our tips How to modify the fan speed in Windows 10 and How to have a quiet PC to keep on the topic of PC cooling.
The “how to water cool pc” is a process that requires the use of liquid cooling. It involves using a radiator, pump, and reservoir to cool the CPU and GPU. The process can be done on a PC or laptop.
Related Tags
- liquid cooling system for pc
- water cooling kit for pc
- intro to water cooling pc
- water cooling system pc price philippines
- is water cooling worth it
